Roget's 21st Century Thesaurus, Third Edition Copyright © 2013 by the Philip Lief Group.

EXAMPLES FROM THE WEB FOR CALIPER

In case the bottom surface is used, 0.150 must be deducted from the reading of the caliper.

It is a 26-inch caliper, and will caliper up to 34 inches diameter.

Then the legs are closed to remove the caliper, and are reset to the scribed line.

Then remove the caliper and measure the distance between the caliper points.

The method of adjusting a spring caliper is shown at Fig. 174, H.

The tailstock center is next set over by guess and a caliper tool is clamped in the toolpost.

The design must be worked out by eye, because of the nature of the work no caliper measurements can be made for depth of cuts.

In order to permit of ready adjustment of a spring caliper, a split nut as shown at G is sometimes used.

The common sizes by caliper, or diameter of the trunk, are five-, seven- or nine-sixteenths of an inch.

But what are the facts left for our consideration in connection with caliper measurement?

RELATED WORDS AND SYNONYMS FOR CALIPER

Roget's 21st Century Thesaurus, Third Edition Copyright © 2013 by the Philip Lief Group.