Its tenons are one hole and one sixth long, and one quarter of a hole in thickness.
Lay out and cut the tenons and mortises for the end rails and back rail.
Lay out and cut the mortises for the tenons of the horizontals or rails.
Cut the tenons on the ends of the rails to fit the mortises in the posts.
The four crosspieces are fastened to the legs by means of tenons and mortises.
Mark out and cut the mortises in the top to receive the tenons on the end pieces.
This will necessitate the use of the bevel in laying off the shoulders of the tenons.
Cut the mortises for the tenons that are on the ends of the side rails.
The tenons on the end rails are laid out in the same manner as the posts.
The end rails have a mortise in them for the tenons on the ends of the foot boards.