It should be got with a square cutting edge, not beveled off as some are made.
The second edge—the upper one—is to be beveled or sloped 1/8 in.
Both the top and bottom of each leg should be beveled or rounded off about 1/4 in.
The ends will be square to the joint edge but beveled to the working face.
A bevel square will be needed for testing these beveled ends.
The curve at the end of the mold is cut out to fit and beveled in like manner.
Over the orbit the maxillæ are thick and beveled, but not raised as in bowdoini.
The metal can be of any desired material and beveled on the edges.
The gate and post should be beveled off to permit a full-open gateway.
The upper rails are tenoned on the sides only and beveled at the ends.